Configure the start and end with angled runs, elevations, and custom step widths.
See how fast it worksThe start and the end can be angled in either direction. The limit is 45° or is determined by the stair’s geometry.
The elevation of the first and last step can be adjusted to suit any installation. For better visualization—including the position of the stringers—a section of the floor slab can be shown in the 3D view; in this example it’s transparent so the stringers are visible.
The top step often has a different width, which can be adjusted easily. With a fixed width, the last step becomes a top landing.
All start and end settings can be changed at any time to adapt to evolving site conditions.
